Sterilization method of tourniquet

Apr 09, 2019 Leave a message

Blood stations should strengthen disinfection, isolation work management, prevention and control of the spread of infectious diseases , disinfection factors are mostly harmful to humans, therefore, staff must have self-protection awareness and self-protection when disinfecting Measures to prevent the occurrence of disinfection accidents and the damage that may be caused to the human body due to improper disinfection methods . The recovered tourniquet should be strengthened. We use different soaking methods depending on the degree of contamination of the tourniquet. Medium and severely contaminated tourniquet (degree of blood pollution), because the tourniquet is a rubber type, if the soaking time is too long, the adhesion will not be used. It should be placed in a chlorine-containing disinfectant solution with an effective chlorine content of 500 mg/l for 20 to 30 minutes. The lightly contaminated relatively clean tourniquet is soaked in a chlorine-containing disinfectant solution with an effective chlorine content of 500 mg/l for 5 to 10 minutes. Rinse the sterilized tourniquet with running water, rinse it repeatedly with pure water, and put it in the clean area to dry, pack and store.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry